Knoa Lava Dome 95 Restoration

Steve-o41
Steve-o41 Posts: 19
edited April 2010 in MTB workshop & tech
i am stripping my bike for a compete overhaul and need some advice.

1.the outer chainring of the chainset is pretty damaged and am looking to replace it with either a like for like or a completely different chain ring make?

2. it mentioned on the chainset that itt's only compatable with an IG chain, are there any alternatives outthere that will suit?

3.How am i able to get the crank arm off as it's a right pain to even move it??

any help, tips or advice will be of great help. :)

Comments

  • supersonic
    supersonic Posts: 82,708
    What cranks are they? And do you know the chainring sizes and BCD?
    GT ZASKAR CARBON TEAM

    VOODOO CANZO

    Come and see me at https://www.facebook.com/biketyke/
  • Steve-o41
    Steve-o41 Posts: 19
    The chainset is Shimano STX 175mm and the outer chain ring is a 42T
  • supersonic
    supersonic Posts: 82,708
    You will need to replace with an 8 speed chainring (or 7 speed, they are essentially the same) of the same bolt holes and bolt circle diameter. Is it actually removable though? The chainset is compatible with all 5,6,7,and 8 speed chains.

    You need a tool called a crank extractor to remove the whole chainset.
    GT ZASKAR CARBON TEAM

    VOODOO CANZO

    Come and see me at https://www.facebook.com/biketyke/
  • nicklouse
    nicklouse Posts: 50,675
    is the cranks an STX or an STX RC?

    please provide a part number of the rear of the arm.

    if they are the '95 STX RC and you need to change the middle ring as well you may have better luck finding Rocking horse-shit.

    1995 STX RC has a single 58mm primary bolt circle, and a special middle chainring that carries the outer ring. (5 bolt)

    1997 STX RC has a single 94mm primary bolt circle, and a special middle chainring that carries the inner ring. (5 bolt)

    and the '98 is standard 4 bolt.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Steve-o41
    Steve-o41 Posts: 19
    i have removed the outer chain ring it's 5 bolt, i believe that it's the 95 version although i cant be sure.
  • nicklouse
    nicklouse Posts: 50,675
    FC-MC33_1995.gif

    http://bernd.sluka.de/Fahrrad/Shimano/T ... 3_1995.gif
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Steve-o41
    Steve-o41 Posts: 19
    Nope it's definately not the STX RC Chainset. it's just the Standard STX version.
    thanks for the picture as its a great help.
  • Andy
    Andy Posts: 8,207
    Steve-o41 wrote:
    Nope it's definitely not the STX RC Chainset. it's just the Standard STX version.
    thanks for the picture as its a great help.

    Pictures usually do help identify things :wink:
  • nicklouse
    nicklouse Posts: 50,675
    so these ones?

    3810638719_5712c6d5be_b.jpg
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Steve-o41
    Steve-o41 Posts: 19
    yep thats the one. is it possible to use other 5 bolt chainrings even if the tooth size is 44t or 39t??
  • nicklouse
    nicklouse Posts: 50,675
    number of teeth does not matter much.

    you just need the right BCD.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Steve-o41
    Steve-o41 Posts: 19
    that's great, so aslong as the BCD is an exact match then i can use a number of chain rings then.
  • Steve-o41
    Steve-o41 Posts: 19
    BCD is 94mm and just found a replacement outer chain ring!!!! Happy days.
    thanks for the info guys was a great help to a complete novice.
    will keep updates on the re-build

Categories