Giant Anthem X3

frogstomp
frogstomp Posts: 412
edited January 2010 in Your mountain bikes
Well, I finally bit the bullet and bought myself an Anthem X3 (2009).

The intention was to buy the bike for the frame and then upgrade it bit by bit..

4290272104_ba50527407.jpg
4290272132_988b562be6.jpg
Rather too narrow (and flat!) bars.. they'll be amongst the first to go..
4289528025_2f3437b415.jpg
Lovely Maestro goodness:
4289528109_f9d0182deb.jpg

Comments

  • Briggo
    Briggo Posts: 3,537
    3rd pic down, what the fook is that on your handlebars? A PDA mount by any chance? Its freakin huge
  • frogstomp
    frogstomp Posts: 412
    Briggo wrote:
    3rd pic down, what the fook is that on your handlebars? A PDA mount by any chance? Its freakin huge

    It's a BoxIt waterproof mobile phone case.. I use it for my N95 with ViewRanger mapping software - it ain't pretty but it does the job very well!
  • lappymatt
    lappymatt Posts: 331
    nice bike

    giant should be sued for fitting and selling the bike with those bars and grips though
  • frogstomp
    frogstomp Posts: 412
    Monday night.. on go the Rebas, Exotic carbon bars and WTB saddle..

    4291678048_692567005a.jpg
    4291675758_84e050ca73.jpg
  • frogstomp
    frogstomp Posts: 412
    Tonight, swap the wheels and tyres.. quick weight check pm the bathroom scales and it comes in at about 12.6kg - should have weighed it before I started!

    4290938063_910606fb1a.jpg

    Next up.. SRAM X0 shifters and derailleurs.. and maybe the Avid Elixir R's, although I've struggled to get the to work properly on the Boardman so I'm a bit torn..
  • -IanW-
    -IanW- Posts: 1
    edited January 2010
    Hi

    I've been doing something similar myself.
    I recommend you take a look at the wheels and cassette, the Giant OE ones are pretty heavy. You will take 2 IIbs of the bike by replacing them with something like stans 355 and a top end cassette.

    Nice to see another a Anthem.

    Cheers



    P1030459.jpg

    P1030449.jpg
  • frogstomp
    frogstomp Posts: 412
    -IanW- wrote:
    I've been doing something similar myself.
    I recommend you take a look at the wheels and cassette, the Giant OE ones are pretty heavy. You will take 2 IIbs of the bike by replacing them with something like stans 355 and a top end cassette.

    Thanks for your comments.. that may be something I'll look into in the future - for the time being I've swapped over the wheels (Ritchey WCS) and cassette (SRAM PG950) from my Boardman which come in a bit lighter.. will probably swap the bottom bracket and crank for the GXP/Stylo GXP pairing off of the CB too.
  • stu8975
    stu8975 Posts: 1,334
    Looking good...standard weight is a tad over 29lb (medium) without pedals if my memory serves me correctly...its in the Giant bikes archive on their webby.
  • frogstomp
    frogstomp Posts: 412
    stu8975 wrote:
    Looking good...standard weight is a tad over 29lb (medium) without pedals if my memory serves me correctly...its in the Giant bikes archive on their webby.

    Yeah, I did see that.. never quite sure how accurate the published measurements are though..
  • stu8975
    stu8975 Posts: 1,334
    My frame came out pretty much spot on when it was weighed in the shop (15g over), so i'd say pretty accurate, if you can, take it to a shop to get an accurate weight..my bathroom scales put mine at just over 25lb :o