Which commuting wheels?
prawny
Posts: 5,439
I'm going to get some handbuilts but I'm not sure which rims to get.
Budget is tight so I'm thinking either open sports or CXP22s.
Does anyone use either of these? Are they any good? They're going to take a battering will they be up to it? Or would I be better off getting some touring rims?
Ooh so many questions
Budget is tight so I'm thinking either open sports or CXP22s.
Does anyone use either of these? Are they any good? They're going to take a battering will they be up to it? Or would I be better off getting some touring rims?
Ooh so many questions
Saracen Tenet 3 - 2015 - Dead - Replaced with a Hack Frame
Voodoo Bizango - 2014 - Dead - Hit by a car
Vitus Sentier VRS - 2017
Voodoo Bizango - 2014 - Dead - Hit by a car
Vitus Sentier VRS - 2017
0
Comments
-
I have just got an open sport to replace my back rim and have heard good things about them plus will be doing the re-build myself.0
-
ive got some cxp22 & some open pro the pros r nicer i tour on 36 hole open pro , me 100+kgs + loaded bike no probs ever . give harry rowland a call on 01843597443 he,s the best around0
-
+1 for the Open Pro's. Got both my sets from Ribble, one set built on Record, the other on Centaur.
True as the day I bought them, no issues.0 -
Another +1 for Open Pros. I had mine built around Ultegra hubs and they have been bombproof. Excellent braking surface on the rims.0
-
Mate rides open sports, i ride cpx22, neither of us have had any issues.
Mine are coming to the end of their life but they've done a lot of miles.
Build quality is FAR more important than which particular rim you've got.0 -
Rigda Chrinas are cheaper than an open sport and stronger than an open pro
They weigh slightly (maybe 50g) more but that is weight in a good way0 -
I have CXP22's (25c tyres) on ultegra hubs for the road bike and A719 on XT's (28c) on the hack.
I'm happy with both although the 719's seem a bit bendy when you're climbing.
Bob0 -
vorsprung wrote:Rigda Chrinas are cheaper than an open sport and stronger than an open pro
They weigh slightly (maybe 50g) more but that is weight in a good way
Any good mail order wheel builders doing these?
I was looking at these 2 from ribble. Budget is as little over £100 as poss, below is even better.Saracen Tenet 3 - 2015 - Dead - Replaced with a Hack Frame
Voodoo Bizango - 2014 - Dead - Hit by a car
Vitus Sentier VRS - 20170 -
I've warped a handbuilt rear Open Sport rim - possibly due to bad luck on a pothole or just because I'm a heavy knacker - and won't use them again. I've used handbuilt CXP 33s, 32h, on Ultegra hubs and am a big fan. Have also used them for cyclo cross.FCN 2-4.
"What happens when the hammer goes down, kids?"
"It stays down, Daddy."
"Exactly."0 -
Harry Rowland built me a pair of Rigida Chrinas on Novatec hubs. Very happy, think they were about £180 for the pair all in.<a>road</a>0
-
prawny wrote:vorsprung wrote:Rigda Chrinas are cheaper than an open sport and stronger than an open pro
They weigh slightly (maybe 50g) more but that is weight in a good way
Any good mail order wheel builders doing these?
I was looking at these 2 from ribble. Budget is as little over £100 as poss, below is even better.
Spa Cycles http://www.spacycles.co.uk/products.php?plid=m2b0s178p00