flat bars or risers for more control?
flavrat66
Posts: 16
I want to slow down the steering on my sx trail II. I've just bought a slightly longer thomson stem(70mm from 50mm) and need a slightly wider bar. But what is the performance difference between a riser bar and a flat bar set up? I'm looking at an easton e70 bar, but don't know whether to go for flat/riser. I'm basically looking for more control/stability up front. My main riding is AM. Any advice would be great.
0
Comments
-
A wider bar will give your more control, a riser bar will put you in a more upright riding position. It would be a crime to put flat bars on an SX trail, the riser bar will help with descents.
I use the EA70 and a 50mm stem on my Reign X and its a perfect setup. I will be trying some wider bars at some point though, see how i get on with them.Intense Socom
Inbred0 -
My bars are 715mm wide and they were a bit of a revelation. More control everywhere.
They're a 20mm rise and they're on a 70mm zero degree stem.
Never going back to a slimmer bar.
I'd have thought that a longer stem on your bike would have made the steering a bit more nervous, but I may be wrong.0 -
It is all relative - if you already have a high front end then adding a riser make make things worse.
Many DH riders arnd those with long forks use flat bars for exactly this reason.0 -
Why do you want to slow the steering down?0
-
'More control' is totally the wrong term in my opinion. That said I'm not sure what term id use instead :P0
-
Joe_Pineapples wrote:My bars are 715mm wide and they were a bit of a revelation. More control everywhere.
They're a 20mm rise and they're on a 70mm zero degree stem.
Never going back to a slimmer bar.
I'd have thought that a longer stem on your bike would have made the steering a bit more nervous, but I may be wrong.
Nope you're right a longer stem pushes the rider weight out over the wheelbase and for most this will lessen the feel/feedback when the trails get steeper and more technical(thats how it felels for me)
I shortened my stem to a 50mm and changed from flats to Eastern's EA70 monkey bars it's really improved the feedback and i have loads more control over the front end. I ride a Cannondale Rush Carbon, as always with anything that changes the geometry of a bike its all relative to how you like your ride to feel and perform.0 -
I use 685mm wide eastons on all my bikes, i find the width sweep etc to feel just right. Everyone id different though i know....0
-
Just switched to EA70 risers w/50mm stem on my Stumpy. There is a considerable improvement downhill with no detriment that I've noticed climbing. Very aware that due to the extra width I will at some point punch a tree with my little finger, and it's going to hurt.0
-
Thanks for the advice all. Will give the EA70 a go with the 2 stem lengths. Cheers0