crossride bearings and service

http://www.tech-mavic.com/tech-mavic/te ... /index.php

if the site does'nt auto load user/pass, l:mavic-com p:dealer

http://www.youtube.com/watch?v=FzoBeJ5HaOI
there's a part 2 it'll be in related on the right side.

http://www.5min.com/Video/How-to-Overha ... b-66770606
there's more vids on mavic hubs at that site too, have a rummage around.

might help

Right

Mavic Crossride + disc 07 on

Fronts

2x SKF 6001 2RSH

Rears

1x SKF 6001 2RSH and 1x 608 2RSH

All are C3 spec bearings (increased internal radial clearance) but 99% sure you dont actually need this, so standdards will be fine

I got a set of 4 delivered for <£20 from http://www.bearing-king.co.uk/ or http://simplybearings.co.uk/shop/

shefbiker wrote:

brillant, thanks... how did you find this out? do the bearings have codes stamped on them?

yeah, serviced em myself, rear is a pain, but front are pretty easy, used a big M10 bolt, nuts and washers to press em in