Avid brake levers & road calipers...

Andy B
Andy B Posts: 8,115
edited April 2009 in The workshop
Does anyone know if these Avid levers

avid%20speed%20dial%20sl%20levers.jpg

work with these road brakes? (must be these brakes as they're the only ones I can get to fit my 27" wheeled bike)

BR7303.jpg

Just need to double check before I spend some cash.
2385861000_d125abe796_m.jpg

Comments

  • whyamihere
    whyamihere Posts: 7,702
    They'll work, but not well. The cable is different to what is required. I can't remember exactly if the levers pull too little cable or too much, but I have a vague memory that it's too much, meaning that the wheels will lock up very easily, which would send you over the bars easily. you want some of the levers designed for flat bar road bikes, such as Shimano Nexave.
  • Andy B
    Andy B Posts: 8,115
    dammit, I hate Shimano levers :evil:

    I had a nagging feeling that the cable pull might be different.

    Back to the drawing board....
    2385861000_d125abe796_m.jpg
  • roger_merriman
    roger_merriman Posts: 6,165
    as ever shieldon brown has this, http://www.sheldonbrown.com/gloss_bo-z.html#brakelever

    essentially it's v type levers or not.
  • Andy B
    Andy B Posts: 8,115
    I can only use the R556 brakes as in my 1st post on this bike, it's a '78 Falcon road bike with flat 23.8mm dia bars (which I was also going to swap ) , so back to the drawing board.

    3357786759_19c94fc826.jpg

    I'm gonna get the R556's & use them with the crappy Weinmann levers I have at the mo.

    3358603076_e430641daa.jpg
    2385861000_d125abe796_m.jpg
  • Wooliferkins
    Wooliferkins Posts: 2,060
    You need Tektro RL720 levers. These come in a 24mm clamp and will pull calipers or canti's.
    Neil
    Help I'm Being Oppressed

Categories