DHX preload ring
callummac
Posts: 36
the preload ring on my DHX 3 rear shock has seized completely. i have managed to free the spring from the adjuster but the adjuster is still seized to the thread.
how can i free it?
also when i replace the shock, should i grease the bolts or not?
how can i free it?
also when i replace the shock, should i grease the bolts or not?
Giant Glory 1
Merlin Malt 2
Merlin Malt 2
0
Comments
-
Plus gas the ring. and then copper slip the threads before refitting the spring.
why would you grease the bolts? grease the DU bushes in the shock a bit. if the bolts run directly on the DU bushes them .. well it is done."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Plus Gas is the mutts nuts.0
-
[/quotePlus gas the ring
sorry, you are going to have to explain,
excuse my novicenessGiant Glory 1
Merlin Malt 20 -
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
thanks,
its alright to ride on it until i can get hold of some though isnt it?Giant Glory 1
Merlin Malt 20