Replacement 34mm Seatclamp?
renko
Posts: 61
I've seen the following guidelines for seatclamps and was wondering id this is generally true?
28,6 mm (for seat tube from 27,0 - 28,6 mm diameter)
31,8 mm (for seat tube from 30,2 - 31,8 mm diameter)
34,9 mm (for seat tube from 33,3 - 34,9 mm diameter)
i.e. if I was looking at a Hope seatclamp to suit a 27.2mm seatube, I'd need the 28.6mm version.
Can some kind soul confirm this please?
Cheers
D
28,6 mm (for seat tube from 27,0 - 28,6 mm diameter)
31,8 mm (for seat tube from 30,2 - 31,8 mm diameter)
34,9 mm (for seat tube from 33,3 - 34,9 mm diameter)
i.e. if I was looking at a Hope seatclamp to suit a 27.2mm seatube, I'd need the 28.6mm version.
Can some kind soul confirm this please?
Cheers
D
0
Comments
-
I have a 31.6 and need a 34mm clamp.
just measure very carefull from top tube with a clothes tape I find best and then just look at the points very carefully.0 -
renko wrote:I've seen the following guidelines for seatclamps and was wondering id this is generally true?
28,6 mm (for seat tube from 27,0 - 28,6 mm diameter)
31,8 mm (for seat tube from 30,2 - 31,8 mm diameter)
34,9 mm (for seat tube from 33,3 - 34,9 mm diameter)
i.e. if I was looking at a Hope seatclamp to suit a 27.2mm seatube, I'd need the 28.6mm version.
Can some kind soul confirm this please?
Cheers
D
Unfortunately not. 28.6mm is for a 28.6mm tube, and so on. Don't confuse with the seat post though - the seatube is often 3-4mm wider, but again, only a rough correlation.0 -
Aha, the secret unraveled;-)
Cheers fellas - will give it a go...
D0