removing xt crank
drewbear
Posts: 23
Hi
I have just got some new chain rings, can anyone tell me how I remove a an Xt hollowtec II crank and what tools I would need for this Job
Cheers
I have just got some new chain rings, can anyone tell me how I remove a an Xt hollowtec II crank and what tools I would need for this Job
Cheers
0
Comments
-
pre loadtool and allen keys.
have a read of parktools."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
cheers, will have a look0
-
Undo allen pinch bolts half a turn at a time alternating between the bolts when pinch bolts undone remove pre-load cap on most shimano cranks there is a small black plate which pivots on the inside pinch bolt this plate has a pin which fits in ahole in the crank axle which stops the arm falling off if the bolts come undone lever this up with a screwdriver and the arm should come off if it doesnt dont hit it soak a rag in hot water and wrap the rag round crank leave for a minute and it should come off with a bit of wigglingFig rolls: proof that god loves cyclists and that she wants us to do another lap0
-
If you don't have a pre-load tool then you can use needle nosed pliers, see the trailside fixes on the front page.0