Easton Vice Stem Question

jon prothero
jon prothero Posts: 469
edited March 2008 in MTB workshop & tech
Got an 0/S easton vice stem and attached it to my ea70 handlebars. There are gaps between the head bracket and the body of the stem were the 5m hex screws tighten up. Is this normal?javascript:emoticon(':oops:')

Comments

  • nicklouse
    nicklouse Posts: 50,675
    the space should be equal top and bottom. and if the bars are the same size as the stem then yes.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • jon prothero
    jon prothero Posts: 469
    The Thomson 4x I had on there before did right up with no gaps. So i was a bit concerned that The Vice did not do right up. I have done it up with top and bottom gaps equal as you have said.

    Thanks for your help!
  • norco forever
    norco forever Posts: 1,177
    my vice always has gaps, just as has been said make them even.
    If you aint in A&E, you aint riding hard enough

    http://identiti4lfe.pinkbike.com/album/Scott-Ransom

Categories