New Bars
chrism001
Posts: 12
Sorry for the dumb question but..........
I want to replace my current (stock) set of bars on my Cannondale F4 with a set of riser bars. Does anyone know what size and spec the new bars should be and does anyone have any recommedations?
Thanks
C
I want to replace my current (stock) set of bars on my Cannondale F4 with a set of riser bars. Does anyone know what size and spec the new bars should be and does anyone have any recommedations?
Thanks
C
0
Comments
-
What stem do you have? Need to know the clamp area size ie 25.4mm or 31.8mm.0
-
Its the stock stem that came with the bike - thanks
C0 -
Had a google, and it says a 31.8mm stem, so need the oversize 31.8mm bar.
Width, rise and sweep are all personal, and you'll see a few choices. Might be worth looking at a carbon bar to make the maximum upgrade, or a light weight alloy one such as a Easton monkeybar SL0 -
you might need the oversize bar if your oe bar has the plastic insert/spacer under the clamp ( you can't take it off and get it onto a riser bar )
mine did on my cannondale so i bought an oversize monleylite riser bar (31.8mm)0 -
thanks to both!
Apologies for my lack of google skills
C0 -
FSA XC-190 7075 XC Riser bar £35
http://www.chainreactioncycles.com/Mode ... delID=4032
only 190grams and quite cheap with a low rise of 20mm, if you want
the 40mm mid rise ones Merlin do them even cheaper, £22
http://www.merlincycles.co.uk/?fn=produ ... egoryId=740
