Chain Device with GXP BB
Jgb1
Posts: 50
Is there any way of fitting a chain device to my bike with no ISG mounts and a GXP Bottom bracket? I have brought a BB stinger thinking it would do it but because of how the GXP works with the spacer it seems to pull it in and I cant think of a way around it.
Thanks
Thanks
0
Comments
-
what size BB shell?
It shouldn't be an issue with 68mm (just replace the driveside spacer)0 -
Sure just fit it as per the instructions. So no spacer on the drive side.
As long as you don't have a 73mm bb in which case you can't."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
just run a fat thin ring, top guide and a clutch mech.0
-
Jgb1 wrote:nicklouse wrote:Sure just fit it as per the instructions. So no spacer on the drive side.
As long as you don't have a 73mm bb in which case you can't.
Yeah sods law its a 73mm :x .
or is there a way around it?
Nope you need something that does not use a BB mount."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
If you have room you could machine the thickness needed off the BB shell0
-
nicklouse wrote:
Ok thanks, Thats what I thought really but wasnt sure if I was missing some thing.
Cheers!0