Hub Service Query

oxocube1

I'm trying to service the rear hub, and replace the freehub on the wheels that came off the XC Pro but having a little trouble getting inside it! It's a Specialized STOUT hub if that helps. I've loosened and completely removed the small grubs screws you can see and tried pulling on either side but not luck. Also tried twisting each end anti-clockwise with two sets of pliers but no luck their either.
There's no flat sides for a cone spanner, just completely round.

I thought the ends were meant to just pull off once the grubs had come out but they may have just seized up over time. Anyone have any ideas? Help appreciated as usual!

nicklouse

remove grub screws and tap the axle out.

oxocube1

Ah ok thanks for that Nick, does it matter which side you do it from?

iLukeKendall

It's usually the non-drive side first - at least that's what I did earlier, although mine used cone spanners so I only needed to undo one side.