Lezyne Road Drive Pump

The Mechanic
The Mechanic Posts: 1,277
edited October 2013 in Road general
I have one of these. However, I have tried to screw it on to Specialized, Continental, Bontrager and Schwalbe presta valves and I cannot get it to screw on any of them. Am I doing something wrong?
I have only two things to say to that; Bo***cks

Comments

  • flasher
    flasher Posts: 1,734
    The hose is double ended presta/schrader you are using the correct end I take it?
  • arthur_scrimshaw
    arthur_scrimshaw Posts: 2,596
    The new road drives have a double presta hose, one end is a screw fit, the other is a push fit which is handy for Continental tubes which tend to unscrew the valve cores when removing the hose. You don't screw this end on it slips over the valve but isn't that secure
  • smidsy
    smidsy Posts: 5,273
    The Mechanic wrote:
    I cannot get it to screw on any of them. Am I doing something wrong?

    Well one may suggest you have the wrong username :mrgreen:
    Yellow is the new Black.
  • arthur_scrimshaw
    arthur_scrimshaw Posts: 2,596
    smidsy wrote:
    The Mechanic wrote:
    I cannot get it to screw on any of them. Am I doing something wrong?

    Well one may suggest you have the wrong username :mrgreen:

    Careful, he may be the other sort :shock:
  • cenkee
    cenkee Posts: 71
    be careful not to lose the tiny o-rings at the tip of the hose. They tend to expand by the heat generated by the pumping and get loose. at least mine did.
  • The Mechanic
    The Mechanic Posts: 1,277
    smidsy wrote:
    The Mechanic wrote:
    I cannot get it to screw on any of them. Am I doing something wrong?

    Well one may suggest you have the wrong username :mrgreen:

    Or it could be that this kit is pants.

    PS I know where you live :twisted:
    I have only two things to say to that; Bo***cks

Categories