Spacers for 11 speed freehub

Tom_R Posts: 9
edited March 2013 in Workshop
Just brought some Campagnolo Zondas with an 11 speed Shimano freehub and discovered they don't come with the 1.85mm spacer needed to move over my 10 speed cassette. As far as I can tell nowhere on the interwebs will sell me one. Any ideas? Are tolerances loose enough for 2x1mm to work?


  • I would think so... 0.15 mm is nothing really... worst for worst you can sand it a bit
    left the forum March 2023
  • Tom_R
    Tom_R Posts: 9
    Thanks. If anyone else comes across this problem, I can report that with 2x1mm the lockring doesn't reach the threads but a single extra 1mm spacer plus a bit of reindexing seems to work quite nicely.