Seat -> Seat post bolts & seat clamp size (Boardman TC)
The bolts holding my seat (Fizik Arione) onto the seat post (Ritchey Comp) have started going rusty so i want to replace them.
Can anyone advise me on the size that I will need as they must be the same across all setups (or most) for the seat/seat post interfaces, i can't seem to find anything just from general Googling?!
Also i'm thinking of replacing the seat clamp for a Thomson item:- http://www.wiggle.co.uk/thomson-seat-collar/
The seat post is 31.6mm and the seat tube does narrow down alot for the clamping area, from the looks of it the seat tube is about 1mm thick (2mm overall obviously across the diameter). That would make it 33.6mm or thereabouts, take it the 34.9mm would be the one to go for?
Bike is a Boardman Team Carbon.
Can anyone advise me on the size that I will need as they must be the same across all setups (or most) for the seat/seat post interfaces, i can't seem to find anything just from general Googling?!
Also i'm thinking of replacing the seat clamp for a Thomson item:- http://www.wiggle.co.uk/thomson-seat-collar/
The seat post is 31.6mm and the seat tube does narrow down alot for the clamping area, from the looks of it the seat tube is about 1mm thick (2mm overall obviously across the diameter). That would make it 33.6mm or thereabouts, take it the 34.9mm would be the one to go for?
Bike is a Boardman Team Carbon.
Cheers, Stu
0
Comments
-
take bolts out and take them to a bolt shop.
see what the clamp says on the bottom of it."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0
