Powertap freehub spares?

bigpikle
bigpikle Posts: 1,690
edited January 2013 in Workshop
Looking for a specific little part for my PT hub but cant find it listed on any sites - hoping someone might be able to help?

I need one of the little bands that holds the 3 pawls/cams in place on a 15mm Powertap freehub body. Its the bit that sits in the groove to the left of the red seal in the pic below. Without it the freehub wont engage and the wheel just spins....

PT_shimano_fh_body_250-02.jpg

Have emailed Paligap and a PT dealer but nothing so far so wondered if anyone had any ideas?

Thanks
Your Past is Not Your Potential...

Comments

  • napoleond
    napoleond Posts: 5,992
    Give Paligap a phone call, although it will likely have to be in the new year now though.
    Ask for the powertap service dept. they are really helpful IME.
    Insta: ATEnduranceCoaching
    ABCC Cycling Coach
  • bigpikle
    bigpikle Posts: 1,690
    cheers Nap
    Your Past is Not Your Potential...
  • desweller
    desweller Posts: 5,175
    Looks awfully like my Novatec hub. As it happens I have a borked spare; if you have no luck with Paligap (and the diameter of the ratchet pawl housing is the same, of course) give me a shout and you can have it.
    - - - - - - - - - -
    On Strava.{/url}
  • bigpikle
    bigpikle Posts: 1,690
    thats kind - thanks

    I'll see if I have any luck with Paligap etc in the New Year
    Your Past is Not Your Potential...
  • bigpikle
    bigpikle Posts: 1,690
    Must just say that Paligap sent me exactly what I needed FOC which was very good of them - good customer service :)
    Your Past is Not Your Potential...

Categories