Clicking noise on some gears ?!??!

simey83

Hi All,

I noticed a clicking noise on some gears. Mainly when the back is the smaller cog and the front is bigger. Further inspection I noticed the chain at the back slightly touches the next cog up every now and again. Is this easily fixed or do I need a new cassette or?

The chain is well lubed.

Thanks

Chunkers1980

Check your indexing. Park Tools for a guide.

goldenwonder

Could be one of several things:
Something as simple as the cable has stretched & needs adjusting.
Mech or hanger are slightly bent, throwing the indexing out.
The cable might need replacing as grit between the inner & outer can cause too much friction, not allowing it to run smooth & holding it instead of letting the mech move properly.

simey83

I have tried to set the front derailleur and index the rear but i still get clicking. It does not seem to rub anywhere and gears seem to change fine. Would this mean anything needs replacing? or should i leave it into a shop?

Chunkers1980

A video of bike upside down pedalling, showing the setup would help.

simey83

Is it ok to leave my bike upside down for a period of time? Is it bad for anything? The shox?

Thanks

The Rookie

Nope, everything will cope fine.

If it's touching the next gear it MUST be one of the issues mentioned.

simey83

blah