Alfine 11 no turn washers

Kin Law
Kin Law Posts: 99
edited July 2012 in Workshop
I need some advice and possible spare parts. I'm building a touring bike from an Orange P7 which has a sliding vertical dropout. I'm using the Alfine 11 hub. Now i would like to run the shifter cable along the TT and down the seatstay as that is where the cable guides are on the frame. Now i believe the no turn washers that came with the hub (blue and green, 8R and 8L) are designed for for vertical dropouts to run the cable along the chainstay. So in order to run the cable along the seatstay I need different no turn washer to angle the hub cable slot towards the saddle.

I found this chart for no turn washers, and i think I would need the Grey and Black washers (7R and 7L). Can anyone confirm this is the case? If so has anyone got any spare? Cheers!

http://www.shimano.com/publish/content/global_cycle/en/us/index/tech_support/tech_tips.download.-Par50lparsys-0012-downloadFile.html/05)%20Non%20Turn%20Washer%20Chart.pdf

Comments

Categories