ISCG or ISCG-05
Welsh_Tom
Posts: 571
Can someone tell me which size is which??
I orded the ISCG-05 and the bottow one tuned up. Is that the right size?
I orded the ISCG-05 and the bottow one tuned up. Is that the right size?
0
Comments
-
Looks right.I don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
http://www.e13components.com/support_iscg_explained.html
From this i would say it is... Well it dose not fit my fit.....
From my bikes website "ISCG-05 Standard
Originally introduced as a feature for chain guides, the ISCG socket on the Nerve AM is compatible with the innovative Hammerschmidt cranks."0 -
Top is ISCG (old)I don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
and your bike is a?and what actually turned up.
Hammershmit will work with both standards."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
2011 Canyon Nerve AM
the bottow one.
That is canyon's own chain guide.
"The shiftable chain guide is compatible with 2 speed cranksets and the ISCG standard." i am guessing canyons are ISCG not ISCG-05.0 -
Welsh_Tom
Email Canyon UK..
I needed to clarify my BB width, got a response within 24hrs.
uk@canyon.com0 -
The 2 times I e-mailed them it was over 48 to get a reponse, and this part needs to go back tomorrow if i wont my money back. i got the ISCG-05 gide as it does say on canyon site the bike is ISCG-050
-
Welsh_Tom
in what way does it not fit?
pics?"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Use a ruler to measure and compare to the E13 guide you posted above?
How does it not fit? Holes not line up?0 -
Tom, just had a look in the pack I got with my Torque and there is an ISCG adapter spearate.
Its a black metal thing, I'll get a pic.0 -
It dose not fit as the holes are about 15mm out of place.
From usesing a ruler to measure the bottom one is ISCG-050 -
The Northern Monkey wrote:Tom, just had a look in the pack I got with my Torque and there is an ISCG adapter spearate.
Its a black metal thing, I'll get a pic.
0 -
Whip the cranks off and see.I don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
-
The Northern Monkey wrote:The Northern Monkey wrote:Tom, just had a look in the pack I got with my Torque and there is an ISCG adapter spearate.
Its a black metal thing, I'll get a pic.
i am 99% sure i never got one of them. can not look for that now as its 11:30pm
but like i said i am 99% sure i did not get that0 -
-
Ok thanks dude. 2 e-amils sent and i will look for it tomorrow but i dont remember it. i hope the lack of sleep is adding to that and it will be there
0 -
Otherwise SS are pretty reasonable, I'm sure they'll swap for the top one, even if you return it a day or two late.I don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
No replay from canyon, ss said i got up to 14 days to get it back to them. i guess i will be asking to swap it was i do not have that plat that northen has0
-
Tom, have you measured the tabs on the frame?
Do the measurements match to either ISCG standards?0 -
I dont have time to take the cranks off. but as far as i could tell the spacing from hole to hole was 40 odd mm. and the cup size was a 36 dd.... wait what we talking about .... it was about 50 mm.0
-
One issue is that is does not have ISCG mounts. The mounts it has are actually a narrower spacing than ISCG old. One call to canyon and Cullen is sorting me out with an adaptor so I can go single ring up front. Good customer service.
Looks like you need the adapter mate.0 -
Just seen your fb dude.
Was afk sorry.
Well I well re-mail him and ask him for one to be sent.
Not sure why there site boast about the bikes having ISCG-05 tabs when they do not :?
Thanks for the great work ben.0
