Forum home› Road cycling forum› Workshop

campag veloce 10sp and sram 1090 casette

odichuodichu Posts: 116
edited July 2011 in Workshop
Hi Chaps,

Is it poss to run a sram 1090 10sp casette with the campag veloce goup?

Only wheels I've got for the moment until I get some from Harry.

Cheers

O

Posts

  • PokerfacePokerface Posts: 7,960
    DO you mean running a wheel with a Sram/Shimano freehub on it (and a Sram cassette) with your otherwise Veloce groupset?

    Or fitting a Sram cassette to a wheel with a Campag freehub?
  • odichuodichu Posts: 116
    Hey Pokerface,

    I mean the former.

    Wheel with SRAM cassette using Campag Veloce.

    :)
  • PeterBLPeterBL Posts: 209
    An SRAM cassette will not fit a Campagnolo freehub.
  • PokerfacePokerface Posts: 7,960
    odichu wrote:
    Hey Pokerface,

    I mean the former.

    Wheel with SRAM cassette using Campag Veloce.

    :)

    AFAIK - this will work. I'm sure I've done the opposite myself int he past (wheel with Campag gears with my Sram set-up).

    Unless there's some weird spacing or chain width issue?


    Anyone?
  • Rule74PleaseRule74Please Posts: 307
    Works but is an unhappy marriage.

    Spacings are a little different but if you can put up with the occasional duff shift and rattles on a gear or 2 it's do-able
    Don't know the Rules?

    http://www.velominati.com/blog/the-rules/
  • keef66keef66 Posts: 13,123
    The sprocket spacing on Shimano and SRAM is the same but Campag is slightly different. The difference is pretty small though, and in practice what you're proposing may work well enough for you.
  • odichuodichu Posts: 116
    hmmm sounds a bit dodgy.

    Will just have to wait for new wheels.

    Thanks all.
  • Monty DogMonty Dog Posts: 20,614
    Depends on how smooth and quiet you like you drivetrain. There are a couple of cable pull dodges on Highpath Engineering website.that are worth trying
    Make mine an Italian, with Campagnolo on the side..
  • ynyswen24ynyswen24 Posts: 703
    Monty Dog wrote:
    Depends on how smooth and quiet you like you drivetrain. There are a couple of cable pull dodges on Highpath Engineering website.that are worth trying

    ...just mentioned Highpath in the buying section, apparently Shimano are reintroducing Biopace. As with this thread I think Chris Bell has some valuable things to say...he's worth listening to.
Sign In or Register to comment.