Canyon Chainstay Rub
I have noticed a rub mark on the inside of the non-drive side of the chainstay up towards the seatpost tube.
I'm running Mavic R-Sys and these have no play with in them at all. Tyres are 24mm Conti Force which leave about 4mm gap between the tyre and the chainstay.
I've put a patch there now but bit worried there is enough flex to allow this.
Anyone else had this on their Canyon?
I'm running Mavic R-Sys and these have no play with in them at all. Tyres are 24mm Conti Force which leave about 4mm gap between the tyre and the chainstay.
I've put a patch there now but bit worried there is enough flex to allow this.
Anyone else had this on their Canyon?
0
