Removing Sram Rival crankset, do I need a 16mm hex?
Do I need to remove the large 16mm bolt before undoing the 8mm on the non-drive side?
0
Comments
-
no."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
The 16mm hex bolt holds in the crank extractor part. Leave it in, and when you undo the 8mm bolt, the crank arm will come off at the same time.0
-
-
yep."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
-
I found putting a thin [hanky like] bit of cloth between GXP cup & tool makes for a tight fit, no slippage & no marking of the cup at all.0
