BB30 Adaptors - press in type
Rich.H
Posts: 443
Any feedback from anyone using either the Wheels Manufacturing BB30 shims or Race Face BB30-X Type adaptor?
Specifically on the Wheels version, what spacers are you using to get a suitable chain line on a 68mm BB with Shimano HT2 cranks (XTR970 in my case)
Cheers
Rich
Specifically on the Wheels version, what spacers are you using to get a suitable chain line on a 68mm BB with Shimano HT2 cranks (XTR970 in my case)
Cheers
Rich
0
Comments
-
Ok 73mm needs no spacers. 68mm does.
on an HT2 set up you need a 5mm spacer.
so you would need to use 5mm less than if it was a HT2 fitting.
as the spacers are outboard of the adaptors it is easy to play with them to give the chainline speced for the frame or what you require."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0