rear travel on 05/06 stumpy
gixerator
Posts: 301
I have two stumpys both bought as frames. An S works and a comp. how can I tell what the rear travel is? Its 190mm on both eye to eye.
Im looking at getting a BETD upgrade but need to know the travel to get the right part.
Many thanks,
Adam
Im looking at getting a BETD upgrade but need to know the travel to get the right part.
Many thanks,
Adam
0
Comments
-
You need to find out the year of the frame and look it up. Without knowing leverage ratios it is impossible to tell from just the shock details.0
-
They were both 120mm, the 2007 S-Works had 130mm for some reason, but all other 2005-2009 Stumpies were 120mm.0
-
when I look on the web for a spec on 05 frames it says that they do a 100mm in the comp and 120 in the works but they are the same eye length and link?0
-
FSR XCs were 100, Stumpjumpers were 120, perhaps different in the US, but that's how it was in the UK.0
-
2005
http://www.specialized.com/gb/en/bc/SBC ... nuItemId=0
2006
http://www.specialized.com/gb/en/bc/SBC ... nuItemId=0
all listed as 120mm
make sure you have the region as UK and Ireland."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0