setting sag

3110neil

Hi
i have toro 318 u-turn 85-130 forks ,now in the manuel it says set the sag by its full travel ,if i have the forks set at 100mm,.do i still work the sag at full travel 130mm,or do i work the sag out at 100mm ,cheers

nicklouse

set it at full travel.

end off done dusted that is it.

3110neil

Thanks Nick
Just to confirm ,set the u-turn down to 100mm,and work the sag at 15-25% of 130mm,
once again thanks for the help

nicklouse

NO.

Full travel and set sag.

nothing else to do.

3110neil

Cheers ,

joshtp

put them to 130mm set the sag so you get about 25-30% of th travel, then wind them back down to 100mm

supersonic

You can't actually set the sag on U turn coil fork - without changing the spring.

Measure it, and see what it is. Around about 25% is good.