New bike, slightly off topic
a.palmer
Posts: 504
I know it's not MTB, so I put it in the crudcatcher. Plans are to spray the forks and bars black then start adding the bling. Gold brake cable,lever, seat clamp, spacers, ect.
0
Comments
-
cool, I'd leave them red TBH, rattle-can paint jobs always look.... well, just like a rattle can job. It never lasts..... or were you gonna get them done locally?0
-
Jr says it's 'fly'0
-
You'll have no pedalling efficiency with the saddle that low...0
-
The forks and bars are sprayed red anyway. I think a couple of coats of black will be alright. I was thinking 5ish coats then a few coats of clear gloss. Maybe primer before the paint?
Haha, my main concern isn't pedaling efficiency so that's fine0 -
How come you bought a childs bike?0
-
Nitromoors with a wire brush
Good rub down with wet and dry
Clean thoroughly.
Primer
Base coat
Rub down
1st coat
Rub down... and so on.
You want about 4 decent coats on there.
then a clear coat over the top
0 -
Nice one, thanks for that. I'll give it a bash this weekend0
-
only a very fine rub down between coats, just to key the next coat. And use a very fine paper0
-
Going for something like this:
0 -
The basket has fallen off the frontRibble Gran Fondo
Guerciotti Lyra Cross
Trek 6000 S/S0 -
-
You may want to think about getting a local powdercoater to do the front end? About £30 for the two. Its going to cost you about £20 to get all the bits to do it yourself, worth a thought?0
-
Spraying done
0 -
Looks good! Stealthy 8)It takes as much courage to have tried and failed as it does to have tried and succeeded.
Join us on UK-MTB we won't bite, but bring cake!
Blender Cube AMS Pro0 -
Some of the gold and a new seat is on:
Just waiting on my gold brake lever so i can put this bad boy on:
0 -
Looks great (I still have a hankering for a BMX to make me feel like a kod again)
I trust you ordered the 'Goldfinger' lever?0 -
I did indeed. Yeah i'm glad to be getting back into bmx. I used to ride alot but haven't for years. I'm thinking maybe a gold chain to finish it off, as i've get a bit of a bent link in the current one0
-
Done, for now
0