10mm and a stinky
norco forever
Posts: 1,177
hi all
i've got an 04 stinky which has never been absued or crashed it is rated up to 170mm however i was wandering if running an 09 66 which is 180mm would cause problems if i ran a little extra sag to compensate
i've got an 04 stinky which has never been absued or crashed it is rated up to 170mm however i was wandering if running an 09 66 which is 180mm would cause problems if i ran a little extra sag to compensate
0
Comments
-
If the crown to axle length isn't maassively different, should be fine.0
-
well its exactly 23mm longer than the 55ata i've been running, which is only 160mm travel
what sort of percent sag would be best to compensate being as i only run 15 to 20% usually0 -
Try it with the same, see how it feels.
Have to experiemnt.0 -
i'm not so fussed about feel lol just damaging my frame.
i was told that an extra 10mm only equates to 6% extra stress than a 170mm fork0 -
what fork did it come with as original?"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
i can't remember now i think a very lanky drop off0
-
so compare the axle to crown height of that fork with the one you want to fit.
the info is on Marzs webby."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
5.5mm is the total difference0
-
on another note 302 domains 09's or 66rcv 09's???0
-
