measure fork travel fox f32 rlc

Anonymous
Anonymous Posts: 79,666
edited June 2009 in MTB workshop & tech
posted my rocky on your rides.
had a comment about the head angle to steep.
so measured my forks and measures 110mm?
im i right in thinking to measure lengh from the seals to the crown
checked the rocky site and they run 100mm on theres would this make a difference to the frames strengh?
thanks
IMG00030-20090618-1153.jpg

Comments

  • nicklouse
    nicklouse Posts: 50,673
    110mm of staintion is ok for a 100mm fork .

    head angle would be slacker with a longer fork.

    Some one can not look at pictures and see it was taken at an angle.

    looks fine.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Anonymous
    Anonymous Posts: 79,666
    Cheers Nick 8)
  • Daz555
    Daz555 Posts: 3,976
    Head angle looks steep on photo but without a dead side-on view and some suitable background for reference, there is no way to tell. It could just be an illusion.
    You only need two tools: WD40 and Duck Tape.
    If it doesn't move and should, use the WD40.
    If it shouldn't move and does, use the tape.
  • Anonymous
    Anonymous Posts: 79,666
    how's this
    IMG00015-20090612-2018.jpg
  • nicklouse
    nicklouse Posts: 50,673
    like i said fine
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown

Categories