Forum home Road cycling forum Workshop

cassette too small for Reynolds Type B wheels

harrywolperharrywolper Posts: 95
edited February 2009 in Workshop
[Note: I am probably doing something stupid however]

Do these wheels need a spacer between the inside of the wheel and the cassette or smallest cog and locking ring? There seems to be too large a gap between the locking ring and smallest cog with no spacer. When I put a spacer on the inside of the hub then the locking ring does not have enough hub to latch onto. I have just tried to use them again (bought with my PX but never used) so maybe I lost a thin spacer or something? The 10 speed cassette has just come off a Durace hub with no problems. The one thing I did notice is that they seem to slip right up against the inside of the wheel/hub connection - my other wheels seem to have a little gap before the cassette starts.

I can put other (9 speed cassettes on this wheel with no problems).

Cheers, Harry

Posts

  • nicklousenicklouse Posts: 81,520 Lives Here
    10spd need a spacer on first. As it sounds like it is not a 10spd specific cassette.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
Sign In or Register to comment.